R63556 Hub 8 Hole Fits John Deere 310B s/n 700148-, 401D s/n 700148-, 480C s/n 7
R63556 Hub 8 Hole Fits John Deere 310B s/n 700148-, 401D s/n 700148-, 480C s/n 7
Couldn't load pickup availability
One New Aftermarket Replacement Front Axle Wheel Hub Fits John Deere Backhoe Loaders and Tractors
This 8-bolt front axle steering hub is a direct aftermarket replacement Fits John Deere R63556. It fits the front axle of a wide range of Fits John Deere backhoe loaders and tractors. Note: On models 4555, 4560, 4755, 4760, 4955, and 4960, this hub is compatible only with machines equipped with 5/8-inch bolt holes. The original hub used 9/16-inch thread bolts; this replacement uses 5/8-inch thread bolts.
Specifications
- Bolt Holes: 8
- Bolt Circle Diameter: 8.000 in
- Pilot Diameter: 5.998 in
- Hub Length: 6.660 in
- Inner Bearing Diameter: 4.124 in
- Outer Bearing Diameter: 2.998 in
- Hole Diameter: 0.625 in (5/8 in)
- Weight: approx. 27-28.5 lb
Compatible Models
Fits John Deere Backhoe Loaders (2WD, s/n 700148 and up): 310B, 401D, 480C
Fits John Deere Backhoe Loaders (additional models): 310, 310A, 410, 410B, 410C, 410D, 410E, 410G, 415B, 500C, 510, 510B, 510C, 510D, 515B, 610B, 610C, 700A, 710B, 710C, 710D
Fits John Deere Tractors: 2355, 2555, 2750, 2755, 2855, 4520, 4555 (w/ 5/8 in bolt holes), 4560 (w/ 5/8 in bolt holes), 4620, 4630, 4640, 4650, 4755 (w/ 5/8 in bolt holes), 4760 (w/ 5/8 in bolt holes), 4840, 4850, 4955 (w/ 5/8 in bolt holes), 4960 (w/ 5/8 in bolt holes), 5020, 6030
Fits John Deere Cotton Pickers: 9940, 9950, 9960
Replaces Part Number(s):
R63556, R40194, R63555
Aftermarket Interchange Numbers
R113716
New aftermarket replacement part - not remanufactured, not used.
