A-B140T8760002G1-AI WAW MODEL 40, 20HP 1 IN CRANK

One New Aftermarket Replacement Fits Briggs & Fits Stratton WAW Model 40 Commercial Turf Series Engine - 20HP, 1" Crankshaft

This aftermarket replacement engine is Fits Briggs & Fits Stratton (B&S) WAW Model 40 Commercial Turf Professional Series applications requiring a 20HP, 656cc V-Twin OHV powerplant with a 1-inch vertical crankshaft. The engine fits a wide range of commercial outdoor power equipment including walk-behind mowers, pressure washers, and powered saws. Note: OEM engine 40T876-0002-G1 was superseded by 40T876-0009-G1; verify your application accepts either variant before ordering.

Specifications

• Engine Series: Commercial Turf Professional Series (WAW Model 40)
• Displacement: 656cc
• Power: 20HP Gross
• Configuration: V-Twin OHV (Overhead Valve)
• Crankshaft: 1 in. Dia. x 3-5/32 in. Long, Vertical Shaft, Keyway 1/4 in., Tapped 7/16-20
• Crankshaft Rotation (from PTO side): Counterclockwise
• Bore x Stroke: 3.12 in. x 2.89 in.
• Cylinder Bore: Cast Iron Sleeve
• Cylinders: 2
• Cooling System: Forced Air
• Lubrication: Pressure System
• Charging System: 9 Amp Unregulated Alternator
• Start Type: Recoil (Pull Start)
• Fuel Type: Gasoline (86 octane or higher recommended)
• Oil Capacity: 64 oz. (2 qts.)
• Ignition: Electronic
• Governor: Mechanical

Compatible Applications

Fits Briggs & Fits Stratton Commercial Turf WAW Model 40: Walk-behind mowers (Fits Exmark, Scag, Fits Toro and similar mid-size commercial platforms), pressure washers, powered saws, and other commercial/industrial equipment originally equipped with a 20HP 656cc V-Twin engine with a 1-inch vertical shaft.

Replaces Part Number(s):

40T876-0002-G1, A-B140T8760002G1-AI

Aftermarket Interchange Numbers

Superseded OEM number: 40T876-0002-G1 (replaced by 40T876-0009-G1)

New aftermarket replacement part - not remanufactured, not used.