9J2308 Slotted Pin Fits CAT STYLE

One New Aftermarket Replacement Slotted Pin for Caterpillar (Cat) J300 Series Ground Engaging Tools

This 9J2308 slotted bucket tooth pin is a ground engaging tool (G.E.T.) component used to secure J300 series bucket teeth and adapters on Caterpillar excavators, wheel loaders, wheel tractor-scrapers, and wheeled excavators. The pin is chamfered on both ends and can be installed from either side of the tooth tip. It pairs with the 8E6259 sleeved retainer (sold separately). This is a Caterpillar-style aftermarket replacement pin -- not OEM.

Specifications

• Length: 3-5/8 in. (92 mm)
• Diameter: 9/16 in. (14 mm)
• Weight: approximately 0.23 lb
• Slotted/grooved profile; chamfered on both ends
• Compatible retainer: 8E6259 sleeved retainer

Compatible Models

Caterpillar Excavators: 205, 205B, 206, 206B, 211B, 212, 212B, 213B, 214B, 215, 215B, 224B, 235B, 235D, 312, 312C L, 312D, 312D2, 315, 315C, 315D L, 315F LCR, 316E L, 317B L, 318D2 L, 320, 320 L, 320B, 320B L, 320B LL, 320B N, 320C, 320D, 320D L, 320D LRR, 320D RR, 320E, 320E L, 320G, 320N, 320S, 321B, 321D LCR, 322, 322B, 322B L, 322B LN, 322C, 322L, 322N, 323, 323F, 323F L, 324E, 325, 325 L, 325B, 325B L, 325F, 325F LCR, 330, 330B L, 330C, 330L, E140, E200B

Caterpillar Wheeled Excavators: M312, M313C, M315, M315C, M316C, M317D2, M318, M318C, M318C MH, M318D, M318D MH, M320, M320D2, M322C

Caterpillar Wheel Loaders: 938F, 938G, 938G II, 950, 950B, 950E, 950F, 950F II, 950G, 950G II, 950GC, 950H, 951B, 955L, 960F, 962G, 962G II, 962H, 963, 966C

Caterpillar Wheel Tractor-Scrapers: 615, 615C, 615C II, 623B, 623E, 623F, 623G

Caterpillar Log Loaders / Forestry: 320B LL

Replaces Part Number(s):

9J2308, 9J-2308, 1073308, 107-3308

New aftermarket replacement part - not remanufactured, not used.