Brake Slave Cylinder Fits Massey Ferguson Tractor 340 350 352 355 360 362
Brake Slave Cylinder Fits Massey Ferguson Tractor 340 350 352 355 360 362
Couldn't load pickup availability
One New Aftermarket Replacement Right Hand Brake Slave Cylinder Fits Massey Ferguson Tractors
This right hand (RH) brake slave cylinder is a direct aftermarket replacement Fits Massey Ferguson tractors and backhoe loaders. It is part of the rear axle brake system and operates using mineral oil hydraulic fluid. Important: The brake system should be fully flushed with clean fluid before installation to prevent seal damage from contamination. This is the right hand side cylinder -- for the left hand side, a separate part number is required.
Serial Number Restriction: On models 340, 350, 355, 360, 365, 372, 375, 382, 383, 390, 390T, 398, and 399 this part fits serial number V39467 and later. Model 362 has no serial number restriction.
Specifications
- Side: Right Hand (RH)
- Center to Center hole spacing: 2 1/8"
- Length: 4 3/8"
- Height: 3 3/4"
Compatible Models
Fits Massey Ferguson Tractors: 340 (S/N V39467 and later), 350 (S/N V39467 and later), 352, 355 (S/N V39467 and later), 360 (S/N V39467 and later), 362, 365 (S/N V39467 and later), 372, 375 (S/N V39467 and later), 382, 383 (S/N V39467 and later), 390 (S/N V39467 and later), 390T (S/N V39467 and later), 398 (S/N V39467 and later), 399 (S/N V39467 and later)
Fits Massey Ferguson Backhoe Loaders: 350 (S/N V39467 and later), 383 (S/N V39467 and later), 390 (S/N V39467 and later)
Replaces Part Number(s):
3477380V93, 3477381M91, 3477381M93, 3477381V93, 3477381M92
Aftermarket Interchange Numbers
Sparex S.42271
New aftermarket replacement part - not remanufactured, not used.
