16 Tiller Tines Set W/Hard for Troy-Bilt Horse Pony10802 1901118 1270-1A 1270-2A
16 Tiller Tines Set W/Hard for Troy-Bilt Horse Pony10802 1901118 1270-1A 1270-2A
Fits Troy-Bilt Horse and Pony Tillers
12062 Pony OPC (5HP) (S/N 120620100101 & HIGHER)
12064 Horse-OPC (7&8HP) ROTOTILLER (S/N 120640100101-UP)
12066 Pony OPC (5HP) (S/N 120660100101-120660100334)
Kit Contains: (8) LH Tines, (8) RH Tines, (32) Cap Screws, (32) Nuts, (32) Lock Washers
Tech Info:
Hole size: 7/16''
Top center to bottom center: 3 1/8''
Center to center bottom two holes: 5 1/8''
Models This Part Fits:
Ecno Horse, Fits Horse and Pony Troy-Bilt Roto Tiller, Fits Horse and Pony Troy-Built Roto Tiller, Horse, Horse and Pony Troy-Built Roto Tiller, MTD, Pony, Troy-Bilt Horse, TroyBilt PonyAdditional Information:
Kit Contains: (8) LH Tines, (8) RH Tines, (32) Cap Screws, (32) Nuts, (32) Lock Washers Hole size: 7/16'' Top center to bottom center: 3 1/8'' Center to center bottom two holes: 5 1/8''Reference Numbers:
10802, 10802-A, 108802, 1245K, 1245K-A, 1270-1A, 1270-1A-A, 1270-2A, 1270-2A-A, 129259, 129359, 1569, 1570, 1901118, 1901118-A, 1901118A, 1901118A-A, 370-270, 370-350, 4459J, 4460J, 6554J, 6555J, 742-0105, 742-0106, 742-04118-0637, 742-04118-0637-A, 742-04119-0637, 742-04119-0637-A, 84-101, 8620, GW-1245, GW-1245-AProduct Category:
Lawn & GardenView More: Lawn & Garden Replacement Parts
Received in record time. Tines were needing to be ground down a bit in order to fit tiller. I had a side are grinder so was able to adapt. For the price, I can't complain. Would purchase again.
Price was fantastic. Fit up not so much. Hole spacing was perfect for my troy bilt pony tiller but tine material was a little too deep where it crosses over tiller shaft. The eight inside tines require a shallow trough be ground in them to fit over the shaft. For me with an angle grinder and a vise that was no problem but without the proper tools, this would have been a show stopper. If it wasn't for this I would have given them a 10 instead of a 5 based upon their being a great value.
They seem to be good quality steel. I installed them on a troy built horse 1 tiller. Had to file just a little to get them to fit right yet remain tight on the hub. I would buy another set of these if and when these wear out.
16 Tiller Tines Set W/Hard for Troy-Bilt Horse Pony10802 1901118 1270-1A 1270-2A