1113-3000 - Hydraulic Lift Arm Fits Ford/New Holland

Models This Part Fits:

2110 (W/ 3 CYL, 901, 4130 4 cylinder, 2000 (1965 To 1981), 740, 1821, 4110 (W/ 3 CYL, 1/57-12/62), 335, 660, 1/75-12/81), 3610N (W/ 3 CYL, 3000, 2131, 960, 501 (W/ 4 CYL, 4031 (W/ 4 CYL, 4610N (W/ 3 CYL, 601, 981, 620, 3910, 640 (W/ 4 CYL, 971, 681, 1/81-4/83), 2610 (W/ 3 CYL, 3/65-12/74), 2120 (W/ 3 CYL, 631 (W/ 4 CYL, 611, 2610, 2600, 3000 (1965 To 1981), 3/82-12/83), 1871, 2130, 12/81-2/90), 2300 (W/ 3 CYL, 620 (W/ 4 CYL, 12/83-2/90), 1881, 333 (W/ 3 CYL, 3330, 811, 334 (W/ 3 CYL, 821, 3600V (W/ 3 CYL, 621, 2131 (W/ 4 CYL, 1/58-12/64), 4600SU (W/ 3 CYL, 1/65-12/74), 1/60-12/62), 661, 701, 1/70-12/74, 640, 2031, 3910 (W/ 3 CYL, 1811, 3910V (W/ 3 CYL, 501, 230A, 2910 (W/ 3 CYL, 820, 3600N (W/ 3 CYL, 881, 4000 4 cylinder, 230A (W/ 3 CYL, 600 SERIES (1955 To 1964), 3120, 2810 (W/ 3 CYL, 900, 5/83-2/90), 1/83-2/90), 841, 800, 4110N (W/ 3 CYL, 334, 3600 (1965 To 1981), 4130, 530A, 4110O (W/ 3 CYL, 2030, 2120 (W/ 4 CYL, 650, 3910N (W/ 3 CYL, 333, 1/63-12/64), 2031 (W/ 4 CYL, 4040, 531 (W/ 3 CYL, 2600R (W/ 3 CYL, 851, 4140, 4120 (W/ 4 CYL, 2000 4 cylinder, 950, 850, 1/57-12/57), 4030 4 cylinder, 671, 941, 4030, 3400, 601 (W/ 4 CYL, 700, 840, 800 SERIES (1955 To 1964), 3910H (W/ 3 CYL, 4110, 621 (W/ 4 CYL, 641, 2910, 871, 3100, 4610O (W/ 3 CYL, 4120, 233 (W/ 3 CYL, 233, 1/56-12/57), 2000 3 cylinder, 861, 631, 2121, 2310 (W/ 3 CYL, 1/59-12/63), 741, 1/75-12/77), 4110NO (W/ 3 CYL, 660 (W/ 4 CYL, 3610, 771, 3600, 650 (W/ 4 CYL, 600 (W/ 4 CYL, 2300, U.K. Only), 2810, 860, 3500 (W/ 3 CYL, 2600V (W/ 3 CYL, 231 (W/ 3 CYL, 4100, 1841, 4131 (W/ 4 CYL, 4031, 1/83-2/84), 630 (W/ 4 CYL, 2111, 1/59-12/64), 1/81-12/84), 600, 541, 231, 961, 3600R (W/ 3 CYL, 2150 (W/ 3 CYL, 335 (W/ 3 CYL, 630, 1/81-2/90), 4121, 611 (W/ 4 CYL, 1/54-12/64), 651, 1801, 1/55-12/57), 801, 4110V (W/ 3 CYL, 4610NO (W/ 3 CYL, 2600 (1965 To 1981), 2600N (W/ 3 CYL, 3300, 3910R (W/ 3 CYL, 4131, 4000, 1/75-7/81), 2100, 10/75-9/76), 651 (W/ 4 CYL, 3110, 951, 531, 2100 (W/ 3 CYL, 641 (W/ 4 CYL

Additional Information:

Category 1 Accommodates 7/8" drawbar or lower link pins 31-5/8" center to center on the ball Left hand side Offset tractors must drill hole for sway chain The arm is 1/2" thick and at widest point is 3" wide

Reference Numbers:

D0NN555C, AMD0NN555C, D0NN555CLH